Inflatable air-column frame
A pump-assisted Ø15 cm air-column frame replaces most conventional rigid poles after the tent is unfolded.

This 7.5 m² family inflatable camping tent uses 420D Oxford with two large doors and two small skylights. Each tent includes a compatible air pump and a confirmed 3000 mm complete-tent waterproof rating for outdoor retailers, distributors and private-label family ranges.
The pitched size is 300 × 250 × 220 cm, with a floor area of 7.5 m². The 220 cm figure is the peak height and does not apply across the whole interior.
Listed capacity is 5 to 8 people. How many people sleep comfortably still depends on sleeping pads, stored gear, sleeping layout and movement space.
Packed size is 70 × 43 × 40 cm and listed weight is 23 kg. The outer fabric is 420D Oxford with a double-layer PVC groundsheet and a Ø15 cm / 0.52 mm air column. Compare this twin-door family format with other camping tents, family camping tents and inflatable camping tents by access, packed size and fabric grade.
The 5 to 8 people figure is a listed capacity, not a guaranteed comfortable occupancy for eight people. Sleeping pads and luggage reduce the remaining movement space on the 7.5 m² floor.
The 23 kg listed weight is planned for family car camping, campsite programs and outdoor retail ranges, where packed size and sleeping space matter more than trail weight.
Two large doors provide access from more than one side and support a practical family entry layout on a single floor. Two small skylights bring daylight through the roof.
The listed configuration includes a chimney flue opening. Buyers planning stove-related use must specify the intended appliance, heat-resistant components, opening dimensions, ventilation and destination-market safety requirements before production or use.
A pump-assisted Ø15 cm air-column frame replaces most conventional rigid poles after the tent is unfolded.
Two large doors give access from more than one side of the same 7.5 m² family interior.
Two small skylights are roof openings for daylight on this family footprint.
The outer fabric is 420D Oxford with a double-layer PVC groundsheet in Khaki as shown.
Air pump: Included. Under normal conditions, inflation takes approximately 5 minutes with the included pump.
Unfolding, positioning, pegging and tensioning guy lines still take extra time. Do not treat the 5-minute inflation figure as a complete setup time.
Field results still depend on correct pitching, anchoring, ground conditions, closed doors and routine maintenance.
This format is intended primarily for family car camping, campsite programs and outdoor retail ranges. Buyers requiring backpacking weight or a permanent shelter should compare another product type.
Match the 5 to 8 people listed capacity to the household size and gear space your customers expect. Then check packed size, shipping method, the twin-door and twin-skylight layout, 420D Oxford, logo, color, instruction language, carton design, order quantity, production schedule and destination-market requirements.
Dimensions, materials and included equipment for this twin-door family inflatable camping tent.
| Model | IT016 |
|---|---|
| Listed capacity | 5 to 8 people |
| Floor area | 7.5 m² |
| Layout | Two large doors; two small skylights; chimney flue |
| Pitched dimensions | 300 × 250 × 220 cm |
| Peak height | 220 cm |
| Packed dimensions | 70 × 43 × 40 cm |
| Listed weight | 23 kg |
| Outer fabric | 420D Oxford |
| Groundsheet | Double-layer PVC |
| Air column | Ø15 cm / 0.52 mm |
| Air pump | Included |
| Inflation time | Approximately 5 minutes with the included pump |
| Complete-tent waterproof rating | 3000 mm |
| Color shown | Khaki |

The twin-door 7.5 m² format suits outdoor retailers and campsite ranges. The site layout shown is a visualization, not a completed customer project.

Close-up details show the small skylights, seams and listed chimney flue opening for sample review.

The hand-pump workflow supports unfold, inflate and secure pitching without assembling a conventional rigid pole frame.





Distributors, outdoor retailers and private-label programs can request this twin-door family inflatable tent for a wholesale or OEM range.
This is a 7.5 m² family inflatable camping tent with two large doors, two small skylights and a listed chimney flue opening.
When pitched, the tent measures 300 × 250 × 220 cm and has a floor area of 7.5 m². The 220 cm figure is the peak height, not a constant interior height.
It is designed for 5 to 8 people as a listed capacity. That does not mean 8 people will always sleep comfortably. Practical comfort depends on sleeping pads, stored gear, sleeping layout and movement space.
Two large doors give access from more than one side of the same 7.5 m² floor. Two small skylights bring daylight through the roof, and a chimney flue opening is part of the listed configuration.
Yes. A compatible air pump is included with each tent for inflating the air-column frame.
Inflation takes approximately 5 minutes with the included pump under normal conditions. Unpacking, positioning, anchoring and securing require additional time.
The complete tent has a confirmed waterproof rating of 3000 mm.
Review expected occupancy, sleeping-pad and gear space, the twin-door and twin-skylight layout, 420D Oxford, packed size, color, logo, instruction language, packaging, order quantity, production schedule and destination-market requirements.